top of page
ASTM Testing
Title | Description | Volume Required (Concentrate) | Price |
|---|---|---|---|
ASTM D1119 | Ash Content | 250 ml | 205 |
ASTM D1120 | Boiling Point of Engine Coolant | 1 Liter | 355 |
ASTM D1121 | Reserve Alkalinity of Coolants | 150 ml | 180 |
ASTM D1122 | Relative Density - Hydrometer | 1 Liter | 190 |
ASTM D1123 | Water Content in Antifreeze | 200 ml | 325 |
ASTM D1125 | Electrical Conductivity | 250 ml | 165 |
ASTM D1126 | Hardness in Water | 250 ml | 190 |
ASTM D1177 | Freeze Point of Engine Coolants | 1 Liter | 380 |
ASTM D1209 | Color by Cobalt | 50 ml | 65 |
ASTM D1287 | pH of Engine Coolants | 150 ml | 65 |
ASTM D1293 | pH of Water | 150 ml | 65 |
ASTM D1384 | Corrosion in Glassware | 1 liter | 1320 |
ASTM D1613 | Acidity | 150 ml | 330 |
ASTM D1881 | Foaming Tendencies of Coolants | 1 liter | 355 |
ASTM D1882 | Effect on Automotive Finish | 150 ml | 120 |
ASTM D2570 | Simulated Service of Coolants | 20 liters | 7375 |
ASTM D2809 | Cavitation Corrosion of Water Pump | 4 liters | 3350 |
ASTM D3147 | Stop Leak Test | Contact lab | 1115 |
ASTM D3321 | Freeze Point by Refractometer | 50 ml | 75 |
ASTM D3634 | Chloride | 1 Liter | 510 |
ASTM D4340 | Corrosion of Heat Rejecting Aluminum Surfaces | 0.75 liter | 1115 |
ASTM D4921 | Foaming of Coolants at Room Temperature | 0.5 liter | 350 |
ASTM D5752 | Group Test | 1 liter | 11220 |
ASTM D5827 | Anions | 50 ml | 180 |
ASTM D5828 | Compatibility & Supplemental Coolant Additive | 150 ml | 380 |
ASTM D5931 | Relative Density - Digital Meter | 100 ml | 75 |
ASTM D6107 | Stop Leak Specification Test Group | Contact lab | 2690 |
ASTM D6130 | Metals by ICP | 50 ml | 205 |
ASTM D6208 | Repassivation Potential of Aluminum and Its Alloys by Galvanostic Measurement | 50 ml | 540 |
ASTM D6210 | Group (without ASTM D7583 if required) | 23 liters | 12415 |
ASTM D7304 | Denatonium Benzoate (DNB) | 560 ml | 190 |
ASTM D7437 | Temperature and Hard Water Stability of Engine Coolants | 2 liters | 470 |
ASTM D7637 | Glycerin by Titration | 150 ml | 415 |
ASTM D7640 | For Engine Grade Glycerin | 2 liters | 2965 |
ASTM D7713 | For Prediluted Glycols | 2 liters | 3145 |
ASTM D7714 | Glycerin Based EC for Light Duty | 30 L | 11220 |
ASTM D7715 | Fully Formulated Glycerin Baed fir HD | 30 L | 12415 |
ASTM D7736 | Acid Esters by Titration | 150 ml | 315 |
ASTM D7820 | RPVOT: Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel | 250 ml | 2695 |
ASTM D7834 | Corrosion of Cast Aluminium Alloys in Non-Aqueous Engine. Coolants under Heat Rejecting Conditions | 2 liters | 1115 |
ASTM D7840 | Foaming for Non-Aqueoud Coolants | 1 L | 335 |
ASTM D7934 | Corrosion & Cast Aluminum Alloys in Non-Aqueous Coolants | 2 L | 1115 |
ASTM D7935 | Corrosion for Non-Aqueous Coolants | 4 L | 1320 |
ASTM D8040 | Corrosion in Glassware for Heat Transfer Fluids | Contact Lab | 1320 |
ASTM D8485 | Corrosion test for E.V. Coolants in glassware | 2.5L 50% Premixed | 2660 |
ASTM D8566 | Glycol Based Electric Vehicle Coolant with Low Electrical Conductivity. Price Does NOT include D445 or D7896 methods | 2 liters | 4860 |
ASTM E202 | Glycols by Gas Chromatography | 50 ml | 560 |
ASTM G31 | Immersion Corrosion Testing Of Metals | 1 liter | 1320 |
Fluoride | Separation of Fluoride | 50ml | 195 |
Ford Pitting | by Ford method | 50 ml | 940 |
Heater Core Corrosion or Erosion Testing | 2000 total hours | Contact Lab | 6565 |
Hot Surface Hard Water Scale Test | Scaling resistance of engine coolants on hot steel surfaces | 4 liters | 2215 |
Radiator Corrosion Testing | 2000 total hours | Per Piece | 7760 |
Simulated Service Testing | of non-aquesos Engine Coolants | 20 liters | 6200 |
Total Dissolved Solids | 2% Conductivity | 50 ml | 235 |
bottom of page